How To - Set Up L2TP/IPSec VPN From The Cipafilter Interface

  1. Navigate to the VPN page under Networking.
  2. Check the Enable L2TP over IPsec box. A Pre-Shared Key will generate in the second field. This can be changed if desired.
  3. In the Client IP Range box, enter an IP range that is not in use by your network. You can enter a subnet using CIDR notation (eg., or an IP range (eg.
  4. Confirm that your settings are correct and click Save and Apply.


Was this article helpful?
0 out of 0 found this helpful