Cipafilter Support:
Support@Cipafilter.com
309 517 2022 option 2
Mon - Fri 7 AM - 6 PM CT
Knowledgebase: How To's > VPN
How To - Set Up L2TP/IPSec VPN on the Cipafilter
Posted by Dustin Hoeppner, Last modified by Clayton Spencer on 22 August 2018 05:34 PM

This KB is applicable to users on 9.0 and above.

Step 1. Navigate to the VPN page under Networking

 

Step 2. Under L2TP over IPsec, check the Enable L2TP over IPsec box. A Pre-Shared Key will generate in the second field.

 

 

Step 3. You will want to enter a Client IP Range. This is going to be an IP range that is not in use by your network. Preferably on a separate class entirely.

Note: You can enter a subnet using CIDR notation (eg. 1.2.3.0/24), or an IP range (eg. 1.2.3.0-255)

 

 

 



Attachments 
 
 1.png (563.57 KB)
 2.png (568.82 KB)
 3.png (571.96 KB)
(1 vote(s))
Helpful
Not helpful

Comments (0)
©Cipafilter 2017. All Rights Reserved.