Cipafilter Support:
Support@Cipafilter.com
309 517 2022 option 2
Mon - Fri 7 AM - 6 PM CT
Cipafilter Documentation - SNMP
Posted by Jim Giseburt, Last modified by Jim Giseburt on 11 April 2017 04:43 PM

Simple Network Management Protocol (SNMP) is a method used to monitor network devices for connection problems and other issues.

To enable SNMP, click Enable SNMP and then fill in the fields below — enter each subnet (in CIDR notation) that is allowed to poll the Cipafilter in the Polling Device Subnet fields, and enter your community string (a sort of password which must be matched between communicating devices) in the Community String fields.

When SNMP is enabled, the Cipafilter will respond to MIB queries for LLDP (Link Layer Discovery Protocol) information.

(0 vote(s))
Helpful
Not helpful

Comments (0)
©Cipafilter 2017. All Rights Reserved.