Cipafilter Support:
Support@Cipafilter.com
309 517 2022 option 2
Mon - Fri 7 AM - 6 PM CT
Knowledgebase: Product Manual > Miscellaneous
Cipafilter Documentation - Firmware Updates
Posted by Jim Giseburt, Last modified by Jim Giseburt on 06 April 2017 12:40 PM

Automatic Updates

The Cipafilter can be configured to automatically receive updates to the current firmware version. To activate this functionality, select Enable Automatic Updates under this section and click Save and Apply.

Each time an automatic update is installed (typically between 10 PM and 2 AM), an e-mail notification will be sent to the Notification Address.

Note: Automatic updates are not currently enabled on the Cipafilter servers, so these settings will not have an effect in the immediate term. However, it is recommended that you enable the feature anyway, if you are interested in it, as this setting will be respected when automatic updates eventually do become available.

Manual Update

The Cipafilter firmware can be manually updated by simply clicking Firmware Upgrade under this section. The firmware upgrade process typically takes 2–5 minutes including the time required to restart the Cipafilter.

(0 vote(s))
Helpful
Not helpful

Comments (0)
©Cipafilter 2017. All Rights Reserved.