How To - Setup L2TP/IPSec VPN on iOS
On the iOS device, navigate to the Settings app, to General, and then to the VPN menu.
Change the Type to L2TP and tap Back.
Fill in the information from your Cipafilter.
Server: DNS name or public IP of the Cipafilter
Account: Username created on the Management Users page of the Cipafilter (VPN checkbox required)
Secret: Pre-Shared Key on the VPN page of the Cipafilter
After all of your information is filled out, tap Done.
From there, you should be able to flip on the VPN switch and if you entered your settings correctly, it will say "Connected."
How To - Set Up L2TP/IPSec VPN on the Cipafilter
Step 1. Navigate to the VPN page under Networking Step 2. Under L2TP over IPsec, check the Enable L2TP over IPsec box. A Pre-Shared Key will generate in the second field. Step 3. You will want to enter a Client IP Range. This is going to be an IP ...
How To - Set up L2TP/IPSec VPN on Windows 10
1. In the Start Menu, click Settings. 2. In the Settings menu, click Network & Internet. 3. Navigate to the VPN tab on the left, and then click Add a VPN connection. 4. Change the VPN provider to Windows (built-in), give it a connection name, ...
IPSec VPN Compatibility
The CIPAFilter utilizes IPSec for VPN connections between other CIPAFilter units. Please note that we do not offer support for VPN tunnels between CIPAFilters and 3rd party products, owing to the complexity and variations in IPSec between products. ...
Manual - VPN
End-User VPN Any user with the VPN access option checked on the Management Users page can access the local network via the Cipafilter's end-user (client-to-server) VPN services, if enabled. The following protocols are supported: L2TP over IPsec ...
iOS - SSL Certificate Installation
This guide will help you install the SSL filtering certificate for Apple mobile devices, including the iPad, iPhone, and iPod touch. Step 1 Visit your domain's portal page to download a certificate. By default, this is https://portal.cipafilter.com/ ...