Manual - Interface Conventions
Most page/section headers, as well as certain option labels, within the Web interface can be clicked to produce the relevant section of this manual.
Clicking a Save Changes button will cause the configuration options on any particular page to be saved but not activated. The Save and Apply button will cause the configuration options to be saved and activated. If there is no Save and Apply option on any given page, the filter may need to be restarted to activate the associated changes.
This article provides links to the individual sections of the Cipafilter product manual. A PDF of the Cipafilter product manual is attached to this article. Introduction Interface Conventions Installation Status Management Users Hot Spare ...
Manual - Web Filtering
The first thing to decide with regard to Web filtering is whether to run individual subnets in transparent or non-transparent (proxy server) mode. Transparent mode — no client configuration is required, the Cipafilter simply intercepts all traffic ...
Manual - VLAN
The Cipafilter can participate in VLANs on your network. Press Add VLAN, then select the interface on the Cipafilter that participates in the VLAN, and finally enter the VLAN Number. Any interface references throughout the Cipafilter interface will ...
Manual - Introduction
Cipafilter is a powerful routing platform capable of delivering an evolving tool set to protect your enterprise. Cipafilter's philosophy is to provide a cuing edge, well rounded, and aggressive network control solution to meet your current and future ...
Manual - Status
The Status page is the "front page" of the Cipafilter Web interface; it provides at-a-glance information about the state of the filter and its hardware, including CPU and memory usage, drive capacities, hardware temperatures, network errors, and ...