Network Objects - Cipafilter Documentation

Manual - Network Objects

Sets of IP ranges can be consolidated into named collections called Network Objects, and then employed elsewhere in the filter configuration. Currently, Network Objects can only be used in the configuration of the Firewall and Port Forwarding settings.

    • Related Articles

    • Manual

      This article provides links to the individual sections of the Cipafilter product manual.  A PDF of the Cipafilter product manual is attached to this article. Introduction Interface Conventions Installation Status Management Users Hot Spare ...
    • Manual - Network Diagnostics

      The Network Diagnostics page serves as a basic front-end for common network troubleshooting utilities such as ping and traceroute.  These utilities can be used to confirm the filter's Internet connectivity and network configuration: The automatic ...
    • Manual - Introduction

      Cipafilter is a powerful routing platform capable of delivering an evolving tool set to protect your enterprise. Cipafilter's philosophy is to provide a cuing edge, well rounded, and aggressive network control solution to meet your current and future ...
    • Manual - Web Filtering

      The first thing to decide with regard to Web filtering is whether to run individual subnets in transparent or non-transparent (proxy server) mode. Transparent mode  — no client configuration is required, the Cipafilter simply intercepts all traffic ...
    • Manual - Group Permissions

      Permissions for groups of users are managed here. Each group has individual settings for the different filtering technologies available, as well as a separate whitelist and blacklist. On this page, you can also edit the global whitelist and blacklist ...